rotating blade

英 [rəʊˈteɪtɪŋ bleɪd] 美 [ˈroʊteɪtɪŋ bleɪd]

网络  动叶片; 转动刮板; 回转叶片; 旋转叶片; 转动刀片

化学



双语例句

  1. Skewed swept rotating blade Axial flow fan Saving energy;
    弯掠动叶;轴流风机;节能;
  2. Secondly, the stress intensity factor at the tip of crack of rotating blade was calculated using weight function method.
    然后根据权函数思想,推导出了高速旋转叶片裂纹尖端处的应力强度因子公式;
  3. Research on Nonlinear Dynamics of the Rotating Blade of Horizontal Axis Wind Turbine
    水平轴风力发电机旋转叶片的非线性动力学研究
  4. Caution! Do not insert hands or feet into the working space of the mower where the rotating blade is fitted.
    注意:请勿将手或脚伸入割草机旋转刀片的工作区。
  5. Process of mold design for plastic rotating blade was introduced.
    介绍了转叶塑件模具设计的过程。
  6. Warning: Do not touch a rotating blade!
    警告:不要触摸旋转的刀片!
  7. This paper has introduced the method of manufacturing rotating blade in Meridionally accelerated axial-flow fan.
    介绍了子午加速轴流式通风机动叶片制作方法,重点阐述了模具制作、组焊及压型工艺。
  8. Research on the optical fiber bundle tip-timing sensor for rotating blade vibration monitoring
    叶片振动检测中光纤束式叶尖定时传感器的研究
  9. The tip-timing measuring method and key technologies of real-time monitoring system of high-speed rotating blade vibration were researched, such as tip-timing sensor, pulse signal sampling system and real-time analysis and processing methods of blade vibration signals.
    研究了叶端定时测量方法及其实时监测系统的关键技术&叶端定时传感器、高速叶端脉冲信号采集系统和叶端定时信号的实时分析和处理。
  10. The dynamic response analysis of the rotating blade when the aerodynamic and mechanical loads are applied on the blade.
    叶片在气动和机械载荷作用下的结构动力学响应分析。
  11. Original Design and Research of a Rotating Blade Engine
    一种转叶式发动机的初步设计和研究
  12. Finite element method analysis of rotating blade with consideration of the coupling of rigid body motion and elastic motion
    考虑刚体运动与弹性运动耦合影响的旋转叶片振动有限元分析
  13. This paper described geometric nonlinear finite element method of calculating frequency of rotating blade, and calculated blade of 700 mm long. The results are in agreement with experiment.
    本文阐述了计算转动叶片的动频的几何非线性有限元素法,并对700mm长叶片动频进行了计算,其结果与试验相吻合。
  14. Application of CAD/ CAM Technology on CNC Machining of Rotating Blade Shroud
    CAD/CAM技术在动叶围带数控加工中的应用
  15. So the scholars of domestic and abroad have being researching a new non-contact measurement technique using blade tip-timing method, which uses of the feature that the time of rotating blade arriving at sensors is different to count blade vibration amplitude and frequency.
    它是一种利用旋转着的叶片在有振动与无振动时到达叶端传感器的时刻所存在的偏差来计算叶片振动振幅和频率的测量技术。
  16. Application of the filter press with a rotating blade in production of precipitated chemical reagents
    旋叶压滤机在化学试剂沉淀产品生产中的应用
  17. The main investigation include: The establishment of the general flexible multi-body dynamics finite element equations of the large scale wind turbine rotating blade and the study of its numerical solving methods;
    论文主要包括:基于柔性多体动力学理论的风力机旋转叶片动力学模型的建立和数值求解方法研究;
  18. A vibration monitoring system for rotating blade based on tip-timing is developed. And this system consists of three parts, which are optical-fiber sensing, data acquisition and vibration analyzing.
    基于叶尖定时原理开发了一套旋转叶片振动监测系统,该系统主要由光纤传感、数据采集、振动分析三个部分组成。
  19. A new type of tip-timing sensor using fiber bundle is designed in this paper to satisfied with requirement of detecting the blade vibration signals in the blade vibration measurement system relying on the national defense pre-research project The research of non-contact measurement technique of rotating blade vibration.
    本文依托国防预研项目非接触式旋转叶片振动测量技术研究,设计了一种新式的光线束式叶尖定时传感器,满足了旋转叶片振动系统对叶片振动信号拾取的要求。
  20. The research actuality and the existent question of minitype ICE are introduced. The structure and working principle of a rotating blade engine are studied and a unique planet framework is designed. The problems of the rotating blade engine are summed up.
    介绍了国内外小型内燃机的研究发展现状和存在的问题,研究了转叶式发动机的结构和工作原理并设计了独特的行星机构,总结了转叶式发动机存在的问题。
  21. Research on Real-time Measuring System for High-speed Rotating Blade Vibration
    高速旋转叶片振动实时监测系统研究
  22. The stiffening reasons of the rotating blade and the influence of the dynamic stiffening effect on the blade natural frequencies are discussed.
    探讨了旋转叶片动力刚化效应产生的原因,并分析其对叶片固有频率的影响。
  23. The real time measuring system of high speed rotating blade vibration, tip timing sensor, pulse signal sampling system and analysis processing of blade vibration signal are researched.
    研究了高速旋转叶片振动实时监测系统,叶端定时传感器、传感器脉冲信号采集电路和叶片振动信号的实时分析和处理。
  24. A method of predicting 3-D compressible boundary layer on the rotating blade of Turbomachinery
    叶轮机械转动叶片上三维可压边界层微分方程的求解方法
  25. Noncontact measuring of high speed rotating blade vibration is the most promising technology in the blade vibration measuring.
    高速旋转叶片振动的非接触测量是叶片振动测量中极具发展前景的技术。
  26. The optical fiber sensor that defects of traditional sensors are overcome provides a reliable way for real time accurate measurement of high speed rotating blade vibration.
    光纤传感器的出现,克服了传统传感器的缺陷,为实时精确测量高速旋转叶片振动提供了可靠的保证。
  27. Numerical simulation of film cooling in rotating blade tip
    旋转涡轮叶片端部气膜冷却的数值计算
  28. The vibration equation of the composite rotating blade is formulated according to the Lagrange equation. The lower-order natural vibration analysis model is also established, which couples the bending and torsion, in the generalized coordinates is also derived by the method of Galerkin.
    根据拉格朗日方程建立考虑复合材料叶片旋转刚体运动的振动方程,采用Galerkin法建立了广义坐标表示的弯扭耦合叶片的低阶固有振动分析模型。
  29. Contact rotating blade vibration testing technology is one of the main technology of thedevelopment of a high speed rotating blade vibration real-time monitoring system.
    接触式旋转叶片振动检测技术是高速旋转叶片振动实时监测系统发展的主要技术之一。